Product Description
- Features
- Specifications
- Dimensions
- Accessories
- Downloads
- Calibration
| ○ Interchangeable force and torque sensors through Plug & Test™ technology (sensors are sold separately) |
| ○ Sensor password protection, for preventing use of an unauthorized sensor |
| ○ Password protection for individual keys and calibration |
| ○ High-speed 7,000 Hz sampling rate |
| ○ USB, RS-232, Mitutoyo, and analog outputs |
| ○ Large backlit graphic display |
| ○ 1,000-point data memory with statistics (min, max, mean, standard deviation) and outputs |
| ○ Live load bar graph with set point markers |
| ○ Programmable set points, with alarms and outputs |
| ○ Peak readings and set points always displayed |
| ○ Averaging mode – calculates average readings over time |
| ○ External trigger mode – for switch contact testing or remotely stopping display update |
| ○ Automatic data output via USB/RS-232 |
| ○ 5 selectable units of measurement |
| ○ Configurable audio alarms and key tones |
| ○ CE mark |
| Accuracy | ± 0.1% of Full Scale + Sensor |
| Sampling Rate | 7,000 Hz |
| Power | AC power adapter or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low |
| Backlight On | Up to 7 hours of continuous use |
| Backlight Off | Up to 24 hours of continuous use |
| USB / RS-232 | Configurable up to 115,200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control |
| Mitutoyo (Digimatic) | Serial BCD suitable for all Mitutoyo SPC-compatible devices |
| Analog | ± 1 VDC, ± 0.25% of full scale at capacity |
| General Purpose | Three open drain outputs, one input |
| Set Points | Three open drain lines |
| Configurable Settings | Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibration |
| Safe Overload | 150% of full scale (display shows “OVER” at 110% and above) |
| Weight | 0.3 kg , 0.7 lb |
| Environmental Requirements | (40 to 100)°F, max. 96% humidity, Non-condensing |
| Manufacturer’s Warranty | Three years (See individual statement for further details) |
Force and Torque Indicators Comparision Chart
IN [MM]
| Included Items | |
| 12-1049 | Carrying case |
| 09-1165 | USB cable |
| AC1030 | AC adapter |
| 08-1026 | Battery (Installed in Indicator) |
| Optional Items | |
| AC1008 | Table top stand |
| 15-1004 | MESUR®gauge software |
| 09-1214 | Interface cable, gauge to test stand crosshead |
| 09-1252 | Interface cable, indicator to test stand crosshead |
| 09-1162 | Interface cable, gauge to test stand controller |
| 09-1165 | USB cable, type micro B to A |
| 09-1158 | USB cable, type B to A |
| 09-1163 | Serial cable, gauge to RS-232, DB-9 |
| 09-1164 | Cable, gauge to Mitutoyo SPC |
| 09-1166 | Analog cable, gauge to dual banana plug |
| 09-1056 | Serial cable, test stand controller to RS-232 DB9 |
| 09-1066 | Cable, travel display to Mitutoyo SPC |
| 09-1180 | Cable, set point / overload protection, gauge to test stand |
○ A Certificate of Calibration is included when calibration services are ordered from MRM Metrology Inc.
○ Use CAL M5i when requesting calibration services from MRM Metrology.
Calibration and Repair Services
MRM provides Calibration and Repair Services for the
M5i Mark-10 Digital Force and Torque Indicator
For a quote, please email us at [email protected]
Reviews
There are no reviews yet.