525-738A Mitutoyo Formtracer Extreme CS-5000CNC

High-accuracy stylus type CNC Surface Measuring Instrument that allows simultaneous measurement of surface roughness and form/contour. A Mitutoyo Laser Holoscale is incorporated in the X1 axis and Z1 axis so that high resolution (X1 axis: 6.25 nm, Z1 axis: 4 nm/ 8nm) is achieved and batch measurement of form / contour and surface roughness can be made.

 

 
Measuring force of detector 4 mN
X1-axis measuring range 200 mm / 8″
Z2-axis vertical travel 300 mm / 12″
SKU: 525-738A Category:

Product Description

  • Features
  • Specifications
  • Dimensions
  • Accessories
  • Downloads
  • Calibration
 
○ High-accuracy stylus type CNC Surface Measuring Instrument that allows simultaneous measurement of surface roughness and form/contour
○ The X1 axis has a maximum drive speed of 1.57”/s (40 mm/s) and Z2 axis has a maximum drive speed of 7.87”/s (200 mm/s). This permits high-speed positioning that may result in a large increase in the throughput of multiple-profile / multiple work piece measurement tasks
○ A Mitutoyo Laser Holoscale is incorporated in the X1 axis and Z1 axis so that high resolution (X1 axis: 6.25 nm, Z1 axis: 4 nm/ 8 nm) is achieved and batch measurement of form / contour and surface roughness can be made
○ The active control method is employed for the Z1-axis detector to implement a wide range measurement capability wherein the variation in dynamic measuring force is restricted
○ Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop even if its main body collides with a work piece or fixture
○ For models with the a-axis, it is possible to perform continuous measurement over horizontal and inclined surfaces by power tilting the X1 axis.
○ For models with the Y-axis table, it is possible to expand the measuring range for multiple work pieces, through positioning in the Y-axis direction
○ Supplied with the easy-to-operate Remote Box, the user can make any movement by selecting the required axis using the two joysticks. The current axis selection is easily identified by the icon on the key top
○ Uses USB for communicating with the Data Processing / Analysis Unit (optional)
 
X1-axis measuring range 200 mm / 8″
Z2-axis vertical travel 300 mm / 12″
Y-axis table unit Installed
a-axis unit
 
Measuring force of detector 4 mN
Base size 750 x 600 mm / 29.5 x 23.6″
Base material Granite
Dimensions 800 x 620 x 1000 mm / 31.5 x 24.4 x 39.4
Mass 240 kg / 529 lbs

Calibration and Repair Services

MRM provides Calibration and Repair Services for the
525-738A Mitutoyo Formtracer Extreme CS-5000CNC

For a quote, please email us at  [email protected]

Reviews

There are no reviews yet.

Be the first to review “525-738A Mitutoyo Formtracer Extreme CS-5000CNC”