971115-3 Solartron 10 mm Standard Digital Probe, DP/10/P

The 971115-3 10 mm Standard Digital Probe is ideal for use in automatic gauging applications or for accessing details that would be difficult or impossible to reach with spring push transducers. It also comes with IP65 sealing to ensure a long working life in wet or oily environments.

Made in United Kingdom and it comes with a one-year manufacturer’s warranty.
Shop for 971115-3 Pneumatic Gauge Probe at MRM Metrology, and save.
Buy 971115-3 Standard Gauge Probe now for the best price.

Email us for the lowest price. Click on [email protected] to request a quotation.

SKU: 971115-3 Categories: , , ,

Product Description

  • Features
  • Specifications
  • Dimensions
  • Accessories
  • Downloads
  • Calibration
 
â—‹ Accurate
â—‹ Repeatable
â—‹ Robust
â—‹ Small size
â—‹ Low tip force
â—‹ Long life
â—‹ Displaces light, dirt and oil
â—‹ Absolute measurement
â—‹ Best cost vs performance
â—‹ Works on all surfaces
â—‹ Can be used in most environments
 
Measurement Performance
Measurement Range 10 mm
Resolution 0.04 µm
Accuracy (Note 1) 0.06%
Accuracy (Note 1) – with In Line Connector 0.15%
Repeatability (worst case) (Note 2) 0.15 µm
Repeatability (typical) (Note 3) 0.07 µm
Pneumatic Axial Cable
Pre Travel 0.15 mm
Post Travel 0.85 mm
Tip Force (N) at Middle of Range ±20% (Note 7)
Spring Push 0.70
12mm Diameter Spring Push 0.80
Pneumatic at 0.4 bar Minimum (Note 6) 0.70
Pneumatic at 1 bar Minimum (Note 6) 2.60
Pneumatic Jet ±30% at 1 bar 0.85
Temperature Coefficient %FS/ºC 0.01
Environmental
Sealing for Probe IP65 with gaiter or IP50 without gaiter
Sealing for Probe Interface Electronics IP43 for module and TCON
Storage Temperature (-20 to 80) ºC
Probe Operating Temperature with Gaiter (5 to 80) ºC
Probe Operating Temperature without Gaiter (-10 to 80) ºC
Electronics Operating
Temperature (0 to 60) ºC
EMC Emission EN61000-6-3
EMC Immunity EN61000-6-2
Probe life (Operating Cycles) 100 million cycles (no side load), > 10 million cycles in most applications
Material
Probe Body Stainless Steel
Probe Tip (options) Nylon, Ruby, Silicon Nitride, Tungsten Carbide
Gaiter (Note 5) Fluoroelastomer or Silicon
Cable PUR
Electronics Module ABS
Electronics Interface (Orbit®)
Orbit® Interface options PC: USB, Ethernet®, RS232, R5485, Bluetooth™
PLC: MODBUS® TCP/IP, EtherNet/IP®, Profinet®, EtherCat®, CC-Link®
Reading Rate Up to 3906 readings per second
Bandwidth of Electronics user selectable 460, 230, 115, 58, 29, 14, 7, 4 Hz
Power 5±0. 25 VDC @ 0.06 A typical
○ Note 1: Accuracy 0.1 µm or % reading whichever is greater
â—‹ Note 2: Repeated operation against a carbide target with side load applied to the bearing using max-min
â—‹ Note 3: Repeated operation against a carbide target standard deviation from average (68%)
â—‹ Note 4: Right angle outlet versions of all of the standard 8h6 diameter probes for measuring ranges 2 mm to 20 mm are available, part description add R after first two letters e.g DPR/2/S is right angled version of DP/2/S
â—‹ Note 5: Different gaiter materials available for specific applications – Fluoroelastomer standard option.
○ Note 6: PNEUMATIC ACTUATION: For continual reliable operation and to maximize working life, the air supply should be clean and dry. 60% maximum relative humidity, filtered to better than 5µm particle size.
â—‹ Note 7: VACUUM OPERATION: 0 to 0.27 Bar Absolute.
 

â—‹ A Certificate of Calibration is included when calibration services are ordered from MRM Metrology Inc.
â—‹ Use CAL 971115-3 when requesting calibration services from MRM Metrology.

Calibration and Repair Services

MRM provides Calibration and Repair Services for the
971115-3 Solartron Metrology Standard Digital Probe

For a quote, please email us at  [email protected]

Reviews

There are no reviews yet.

Be the first to review “971115-3 Solartron 10 mm Standard Digital Probe, DP/10/P”

Related Products