Product Description
- Features
- Specifications
- Dimensions
- Accessories
- Downloads
- Calibration
| ○ Similar in size to Series 2 dial indicators |
| ○ As compact as standard Series 2 dial indicators |
| ○ Large, easy-to-read LCD |
| ○ GO/±NG judgment can be performed by setting upper and lower tolerance limits |
| ○ The judgment result (GO/±NG) can be displayed in full-size characters |
| ○ The positive/negative count resulting from the spindle’s up/down movement can be toggled |
| ○ Internal calculations using the simple formula of [F(x)=Ax)] are available |
| ○ Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on |
| ○ Unlimited response speed eliminates over-speed errors |
| ○ The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading |
| ○ With SPC data output |
| ○ Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF |
| ○ Data output,inch/mm conversion (on inch/metric models only) |
| ○ Alarm: Low voltage, Counting value composition error, Over-flow error |
| ○ Tolerance limit setting error Internal calculations using the simple formula of [F(x)=Ax)] are available |
| ○ Low measuring force |
| Range | (0 to 12.7) mm |
| Resolution | 0.001 mm |
| Accuracy | ± 0.003 mm |
| Length Standard | ABSOLUTE electrostatic capacitance type linear encoder |
| Max. Response Speed | Unlimited |
| Measuring Force | (0.4 to 0.7) N |
| Battery | SR44 (1 pc.), 938882 |
| Battery Life | Approx. 5,000 hours under normal use |
| Dust/Water Protection Level | IP42 |
| Warranty | One year limited manufacturers warranty |
| 905338 | SPC cable (40” / 1 m) |
| 905409 | SPC cable (80” / 2 m) |
| 21EZA198 | Spindle lifting lever (ISO/JIS type)* |
| 21EZA199 | Spindle lifting lever (ANSI/AGD type)* |
| 21EZA105 | Spindle lifting knob(12.7 mm / 5″ ISO/JIS type)** |
| 21EZA150 | Spindle lifting knob(12.7 mm / 5″ ANSI/AGD type)** |
| 21EZA197 | Spindle lifting knob(25.4 mm / 1″,50.8/2″ models) |
| 21EZA200 | Spindle lifting knob(50.8 mm / 2″) |
| 540774 | Spindle lifting cable (stroke: 1”/ 25.4 mm) |
| 02ACA571 | Auxiliary spindle spring for 25 mm / 1” models*** |
| 02ACA773 | Auxiliary spindle spring for 50 mm / 2” models*** |
*Can be used on 12mm/.5” models only.
**Not available for low measuring force models.
○ A Certificate of Calibration is included when calibration services are ordered from MRM Metrology Inc.
○ Use CAL 543-394 when requesting calibration services from MRM Metrology.
Calibration and Repair Services
MRM provides Calibration and Repair Services for the
543-394 Mitutoyo Digimatic Indicator
For a quote, please email us at [email protected]
Reviews
There are no reviews yet.