543-350B Mitutoyo Indicator, Digimatic

ABSOLUTE Digimatic Indicator ID-C Series 543-with Green/Red LED GO/NG Signal Output Function. With the max./min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.

 
Range (0 to 12.7) mm
Resolution 0.001 mm
Accuracy ± 0.003 mm
Other Models

Product Description

  • Features
  • Specifications
  • Dimensions
  • Accessories
  • Downloads
  • Calibration
 
○ With the max./min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set
○ The signal ID-C can output the signal of the GO/±NG judgment result against the peak values set
○ Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained
○ This provides high reliability with no deterioration of the contact point and volume adjustment
○ The signal can be output to an external device like a sequencer through the NPN open-collector
○ The GO/±NG judgment result is also indicated by the green/red LED and the “<, O, >” signs on LCD
○ Signal ID-C always displays the spindle “Absolute Position” from the origin at power-on
○ IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments
 
Range (0 to 12.7) mm
Resolution 0.001 mm
Accuracy ± 0.003 mm
Display LCD
Length Standard ABSOLUTE electrostatic capacitance type linear encoder
Max. Response Speed Unlimited
Measuring Force 2.0N or less
Power Supply DC 12 – 24V ± 10%
Dust/Water Protection Level IP54
Stem Ø 8 mm
Thread M2.5×0.45 Thread
Type ISO/JIS
Type Flat-back

Indicator Absolute with Red Green LED

 
902011 Spindle lifting lever* (ISO/JIS type)
540774 Spindle lifting cable* (Stroke: .4” / 10mm)
902794 Spindle lifting lever* (ANSI/AGD type)
125317 Rubber boot

*When using the spindle lifting lever/cable, IP54 is not guaranteed.

Calibration and Repair Services

MRM provides Calibration and Repair Services for the
543-350B Mitutoyo Indicator, Digimatic

For a quote, please email us at  Service@MRMmetrology.com

Reviews

There are no reviews yet.

Be the first to review “543-350B Mitutoyo Indicator, Digimatic”